High carbon steel is also called tool steel. The carbon content of high carbon steel plate is from 0.60% to 1.70%. It can be quenched and tempered.
After proper heat treatment or cold drawing hardening, high carbon steel has high strength and hardness, high elastic limit and fatigue limit, and the cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor. It is mainly used in the manufacture of springs and wear-resistant parts.
Carbon tool steel is a high-carbon steel that basically does not add alloying elements. It is also a carbon steel with low cost, good cold and hot workability, and a wide range of applications. Its carbon content is between 0.65 and 1.35%, and it is a steel specially used for making tools. The density of high carbon steel is 7.81g/cm³.
KUAIMA steel company has more than ten years of experience in diversified operations and multi-product transactions, involving round bar, ship plate, seamless pipe, plate, coil, wire, bright bar, pipe fittings and a wide range of carbon steel, alloy steel And more product sizes of stainless steel materials, these products we produce meet national and international quality standards, such as ASTM, ASME, DIN, JIS, ISO, etc. The company has 25 production lines for various products, with an annual output of 500,000 tons, and is committed to Provide high-quality steel products and provide supporting services and solutions for global customers. Welcome to KUAIMA steel company.
Grade | C | Si | Mn | P | S | Cu |
ASTM A283 Grade A | 0.14 | 0.15-0.40 | 0.9 | 0.035 | 0.04 | 0.2 |
ASTM A283 Grade B | 0.17 | 0.15-0.40 | 0.9 | 0.035 | 0.04 | 0.2 |
ASTM A283 Grade C | 0.24 | 0.15-0.40 | 0.9 | 0.035 | 0.04 | 0.2 |
ASTM A283 Grade D | 0.27 | 0.15-0.40 | 0.9 | 0.035 | 0.04 | 0.2 |
Grade | Yield Strength (MPa) | Ultimate Tensile Strength (MPa) | Elongation at Break (%) |
ASTM A283 Grade A | 165 | 310 - 415 | 27 |
ASTM A283 Grade B | 185 | 345 - 450 | 25 |
ASTM A283 Grade C | 205 | 380 - 515 | 22 |
ASTM A283 Grade D | 230 | 415 - 550 | 20 |
Width | 1000mm/1219mm/1240mm/1500mm/2000mm or as customer's requirements | |||
Thickness | Cold rolled:0.1~4.0mm | |||
Hot rolled:4mm~100mm | ||||
Length | 100mm to 12000mm or as customer's request | |||
Surface | N0.1, N0.4, 2D, 2B, HL, BA, 6K, 8K, Mirror,etc | |||
Material | 201,202,301,302,303,304,304L,304N1,309S,310S,316,316L,316Ti,316N,317,317L,321,409L,410,420,430,904,904L,etc | |||
Grade | 200/300/400/500/600/700/800/900 series/ | |||
Standards | AISI ASTM JIS SUS DIN GB | |||
Certifications | ISO 9001 | |||
Packing | Industry standard packaging or according to client's requirement | |||
Place of origin | ShanDong China(mainland) | |||
Brand | HBIS,JINGYE,TISCO,TIANTIE | |||
Payment | T/T,L/C | |||
Delivery time | Up to order quantity |
carbon steel plate supplier | china carbon steel plate factory |
carbon steel plates manufacturers in china | china carbon steel plate suppliers |
carbon steel shim plate | china carbon structural steel plate |
carbon steel shim plates | china high carbon steel plate |
carbon steel tred plate 1 8 | china mild carbon steel plate factory |
carbon structural steel plate factories | china q235b carbon steel plate |
carbon structural steel plate factory | cold drawn carbon steel plate |
carbon structural steel plate manufacturers | cold rolled carbon steel plate sheet |
Carbon steel plates are mainly used in chemical, petrochemical, marine engineering, seawater pipelines, seawater desalination and other industries, nuclear engineering, paper and pulp industry
oil and gas
Carbon steel plates are mainly used in chemical, petrochemical, marine engineering, seawater pipelines, seawater desalination and other industries, nuclear engineering, paper and pulp industry
energy
Kuaima Steel serves the entire service cycle of power generation and synchronous activities in design, construction, repair and maintenance.
construction
Kuaima Steel provides comprehensive products and services for infrastructure, bridges, pipelines, etc. .
marine
Kuaima Steel is a trusted supplier for subsea to surface operations and shipbuilding operations.
Malaysia, United Arab Emirates, Indonesia, Saudi Arabia, Iran, Qatar, India, China, United Kingdom, Singapore, Canada, Thailand, Korea, Turkey, Philippines, Egypt, Germany, Italy, Japan, Russia, Vietnam, Australia, South Africa , Portugal, Morocco, Costa Rica, Kazakhstan, Netherlands, Mexico, Brazil, France, Spain, Nigeria, Bangladesh, Kuwait, Iraq, Ukraine, Poland, Jordan, Romania, Oman, Hong Kong, Venezuela, Colombia, Norway, Chile, Te Trinidad and Tobago, Greece, Czech Republic, Belgium, Sri Lanka, Cyprus, Angola, Myanmar (Burma), United Kingdom, Canada, Korea, Thailand, Netherlands, Spain, Turkey, Australia, Mexico, Pakistan, Vietnam, Brazil, Philippines, France, Taiwan, Poland, South Africa, Russia, Nigeria, Kuwait, Czech Republic, Norway, Romania, Egypt, Oman, Sweden, Belgium, Hong Kong, Israel, Colombia, Switzerland, Denmark, Finland, Argentina, Venezuela, Peru, Ukraine , Chile, Bangladesh, Portugal, Ireland, Austria, Algeria, Greece, Iraq, New Zealand, Slovakia, Hungary, Kazakhstan, Slovenia, Lithuania, Serbia, Sri Lanka, Bahrain, Bulgaria, Morocco, Tunisia, Croatia, Jordan, Ecuador, Te Trinidad and Tobago, Estonia, Azerbaijan, Ghana, Lebanon, Cyprus, Dominican Republic, Latvia, Libya, Costa Rica, Cambodia, Macedonia (FYROM), Belarus, Jamaica, Palestine, Turkmenistan Belarus, Jamaica, Palestine, Turkmenistan Belarus, Jamaica, Palestine, Turkmenistan and other countries
Product